How to Fix Warhammer 40K: Darktide Error Code 2007 in 2024?

Experiencing technical issues while gaming is always a frustrating ordeal, and that’s especially true when you’re attempting to enjoy a long-awaited multiplayer session with your friends. The moment you see an error code on your screen, it can feel like a personal affront. Recently, I’ve been having a bit of trouble myself in the form of the dreaded Warhammer 40K: Darktide error code 2007.

Fear not, fellow gamers! After encountering this pesky problem and doing some research to help rectify the issue, I was successful in my quest to fix Darktide error code 2007. To prevent any fellow players from going through this frustrating situation, I’ve decided to share my insights and solutions for overcoming this obstacle so you can get back to slashing your way through hordes of foes in no time!

Also Read: How to Fix Darktide Error Code 2006?

What Does Warhammer 40K: Darktide Error Code 2007 Mean?

Warhammer 40K: Darktide error code 2007 typically pops up when there are connectivity issues between your computer and the game server. This error is related to a loss of network connection or unstable internet, which results in the game being unable to effectively communicate with the servers.

When this error occurs, it usually prevents you from engaging in online gameplay, making it impossible for you to join or host multiplayer sessions. Now that we know what the Darktide 2007 error code means, it’s important to understand its possible causes before diving into the solutions.

This issue may arise from various factors such as disruptions to your Wi-Fi signal, insufficient bandwidth allocation by your Internet Service Provider (ISP), outdated network drivers on your computer, or even temporary server-side issues faced by the game itself. Being aware of these potential causes makes discovering and implementing an effective remedy much simpler and more efficient.

How to Fix Warhammer 40K: Darktide Error Code 2007 in 2024?

1. Restart your Computer and Router/Modem

Often, the simplest solution to connectivity issues is a quick restart of your computer and router/modem. This process helps reset any network configurations, clears temporary files, and can resolve minor glitches that may occur during extended usage periods.

1. Save any ongoing work on your computer and close opened applications.
2. Shut down your computer by clicking on the Start button in the lower left corner of the screen (Windows) or dock (macOS), then selecting Shut Down or Restart.
3. Unplug your router/modem’s power cable. Wait for about 30 seconds to allow the device to discharge any residual power. This brief waiting period is referred to as a power cycle, which ensures that all temporary data stored in the device’s memory is deleted.
4. Plug the power cable back into your router/modem, allowing it enough time to boot up properly. The required time may vary between different devices, but a general rule of thumb is to wait for 1-2 minutes until all connection LEDs are stable.
5. Turn on your computer and wait for it to boot up completely.
6. Launch Darktide and attempt to connect once more. If you no longer encounter Error Code 2007, then congratulations! You’ve successfully resolved the issue with a simple reboot.

2. Check for Server Outages

The issue resulting error code 2007 in Darktide might not be on your end; it could simply be the result of a server outage or scheduled maintenance.

A. Visit Official Social Media Channels

The first thing you can do is check the game’s official Twitter account and other social media platforms for any updates. Developers often post about known issues, scheduled maintenance, and outages on these channels.

• FatsharkWARHAMMER on Twitter
• Fatshark on Facebook

B. Visit Gaming Communities and Forums

Another great source of information is the game’s online community. You can visit discussion forums and subreddits to see if other players are experiencing similar issues with Darktide Error Code 2007.

• Steam Community Discussions
• r/warhammer_darktide subreddit

C. Check Server Status Websites

Independent websites also monitor the status of game servers and provide details on current outages or issues.

Visit websites such as:

• Downdetector
• Is It Down Right Now?

Perform a search to see any reported issues or interruptions in service. If there is indeed a server outage, it’s best to wait it out until the developers resolve the issue and restore full functionality. However, if you cannot find any information about a potential server outage or ongoing maintenance, proceed with exploring other solutions listed below.

3. Change your DNS Settings

Altering Domain Name System (DNS) settings can improve your connection stability and may fix the 2007 Darktide error in some cases. A well-configured DNS server enhances connectivity and resolves network-related issues efficiently while avoiding downtime or latency. To change your DNS settings, follow the steps outlined below.

1. Press the Windows + R keys together on your keyboard to open the Run dialog box. Type control and click on OK to launch the Control Panel.
2. Locate and select Network and Internet, then click on Network and Sharing Center.
3. In the left navigation pane, click on Change adapter settings.
4. Find the network adapter that you’re currently using for your internet connectivity (typically either Wi-Fi or Ethernet). Right-click on this adapter, and select Properties from the context menu.
5. In the Properties window, you’ll see a list of items. Scroll down to find Internet Protocol Version 4 (TCP/IPv4) or just Internet Protocol Version 6 (TCP/IPv6). Click on it once to highlight it, and then hit Properties again.
6. Under General, select the option: “Use the following DNS server addresses”. Enter a preferred DNS address (e.g., Google Public DNS: 8.8.8.8 for IPv4 or Google Public DNS: 2001:4860:4860::8888 for IPv6) in their respective fields, followed by an alternate address (e.g., Google Public DNS: 8.8.4.4 for IPv4 or Google Public DNS: 2001:4860:4860::8844 for IPv6). For a detailed guide, Google maintains a list of instructions for changing the DNS settings across various platforms and devices.
7. Click OK to save your changes, and then Close the Properties window.

After completing these steps, restart your computer for the updated DNS settings to take effect.

4. Disable VPN or Proxy Services

Using a VPN or a proxy service can help conceal your location and protect your data, but these services can also lead to connectivity issues in online gaming. If you have an active VPN connection or if you’re using a proxy service, disabling them might resolve the problems related to Darktide error code 2007.

To disable a VPN connection, follow these steps:

1. Locate the VPN application icon in the system tray (usually at the bottom right of your screen).
2. Right-click on the VPN icon and select Disconnect from the context menu.

For proxy services, follow these simple steps:

1. Press Win + I to open Settings on your computer.
2. Select Network & Internet from the available options.
3. In the left pane, find and click on Proxy.
4. Under Manual Proxy Setup, turn off ‘Use a proxy server’ by toggling off the switch.

Now that you’ve disabled your VPN or proxy service, it’s essential to restart Darktide. This allows the game to establish a new connection with its servers. To do this:

1. Close Darktide entirely.
2. If it’s running in Steam, right-click on the game in your library and select Exit Game from the dropdown menu.
3. Relaunch Darktide and check if Error Code 2007 is resolved.

5. Update your Network Drivers

Outdated network drivers can become a significant roadblock in maintaining a steady connection to the game servers, ultimately resulting in errors. To avoid this issue, you must ensure that your network drivers are always up-to-date. Updating your drivers regularly ensures optimal performance and stability for your system’s network connection.

Here’s a step-by-step guide to updating your network drivers:

1. Press the Windows Key + X simultaneously, and then select ‘Device Manager’ from the list that appears.
2. In the Device Manager window, locate the ‘Network adapters’ category and click on the arrow next to it to expand its contents.
3. Look for your main network adapter in the list—this should be either an Ethernet or Wi-Fi adapter, depending on your setup. Right-click on it and choose ‘Update driver.’
4. A new window will open with two options: ‘Search automatically for updated driver software’ or ‘Browse my computer for driver software.’ It’s recommended to select ‘Search automatically for updated driver software’ as this will allow Windows to search online for any available updates.
5. If there are any updates available for your network adapter, Windows will proceed with downloading and installing them. Once completed, make sure to restart your computer so that all of the changes take effect.

By keeping an eye on your network drivers and making sure they’re always current with the latest updates, you’ll be well on your way toward eliminating any potential hiccup caused by this essential component of connecting seamlessly with Darktide’s servers.

Also Read: How to Fix Destiny 2 Error Code Calabrese?

6. Configure Router Quality of Service (QoS) Settings

Quality of Service (QoS) settings in your router configuration allow you to prioritize certain types of internet traffic. By configuring these settings, you can ensure that Darktide gets the bandwidth it needs to run smoothly, which may help resolve Error Code 2007 and enhance your overall gaming experience.

The following are general steps to configure your router’s QoS settings. Note that the specific steps may vary depending on your router’s make and model.

1. Log in to your router’s control panel by entering its IP address (usually 192.168.0.1 or 192.168.1.1) into your web browser’s address bar.
2. Enter your username and password when prompted (usually found on a label on the bottom or back of your router).
3. Find the QoS settings, which might be located under a Network Settings, Advanced Settings, or Quality of Service tab.
4. Enable QoS if it is not already activated, and look for options to prioritize traffic based on device or application.
5. Prioritize Darktide by either selecting the game from a list of applications or by manually entering the device IP address on which you play the game.
6. Set the priority level for Darktide to “High” or “Highest” – whichever is available in your router’s configuration menu.
7. Save and apply the changes to update QoS settings.

Once you’ve completed configuring your router’s QoS settings, restart both your computer and router for good measure.

7. Temporarily Disable Antivirus and Firewall Software

Though it’s true that antivirus and firewall programs are designed to keep your computer safe from online threats, there are times when these protective measures may unintentionally interfere with certain applications, such as multiplayer games like Darktide. In these cases, it’s worth trying to temporarily disable your antivirus and firewall software to see if it resolves error code 2007.

Important Note: Remember to enable these security features again immediately after testing, whether the problem is resolved or not.

Steps to temporarily disable antivirus software:

1. Locate the antivirus icon on your taskbar (usually at the bottom-right corner of your screen).
2. Right-click the icon and look for an option that allows you to temporarily disable it (e.g., “Disable protection” or “Pause protection”).
3. Choose a brief duration for which you’d like the program disabled—you can also manually re-enable it later.

Steps to temporarily turn off Windows Firewall:

1. Press Win + X (which opens up the Quick Access Menu) and select Control Panel.
2. Change Control Panel view mode from Category view to Large Icons or Small Icons, then click Windows Defender Firewall.
3. On the left pane, click Turn Windows Defender Firewall on or off.
4. Under Private network settings and Public network settings, choose the option that says “Turn off Windows Defender Firewall (not recommended)”.

Upon disabling these security features, launch Darktide once more and check if Error Code 2007 has been resolved. Should this solution have no effect on resolving the issue, don’t forget to re-enable both your antivirus and firewall protection before moving on to other potential solutions!

8. Switch to a Wired Connection

Often, the simplest solution to improve your gaming experience and resolve connectivity issues is to switch from a wireless (Wi-Fi) connection to a wired one via an Ethernet cable. A wired connection is more reliable, and stable, and typically offers faster speeds with fewer interruptions than a Wi-Fi connection.

Here are the steps you need to follow when switching from Wi-Fi to a wired (Ethernet) connection:

A. Acquire an Ethernet cable

You’ll need an Ethernet cable – preferably Cat 5e or Cat 6 – for this process. These cables can be easily found in most electronics stores or online.

B. Locate the Ethernet ports

Reach out for your computer and router, then find the Ethernet ports on both devices. On your router, it is usually located next to additional LAN or network ports.

C. Connect your computer/router using the Ethernet cable

Insert one end of the Ethernet cable into your computer’s Ethernet port and plug the other end into one of the available LAN ports on your router.

D. Disable Wi-Fi on your computer

To ensure that you’re using the wired connection, disable Wi-Fi on your computer by turning off its wireless networking capabilities. You can do this through your operating system’s Network & Internet settings.

E. Test internet connection

Once you have established a wired link between your computer and router, check if you have internet access by opening any websites or performing online tasks like streaming videos.

9. Flush the DNS cache and Reset the TCP/IP stack

Flushing the DNS cache can help resolve connectivity issues by clearing out old, outdated records and making way for new ones. Similarly, resetting the TCP/IP stack can solve conflicts that might be preventing your computer from communicating with the game server effectively. Here’s how you can flush the DNS cache and reset the TCP/IP stack to tackle Darktide error:

A. Open Command Prompt as Administrator

1. Press Win + S to open the Windows search bar.
2. Type in “Command Prompt” or “cmd”.
3. From the search results, right-click on ‘Command Prompt’.
4. Select ‘Run as administrator’.

B. Flush DNS Cache

1. In the Command Prompt window with administrative privileges, type in:

ipconfig /flushdns

2. Press Enter. You should see a message indicating that you have successfully flushed your DNS resolver cache.

C. Reset TCP/IP Stack

In the same Command Prompt window, enter these commands one by one and press Enter after each command:

netsh int ip reset
netsh winsock reset

This will help you in resetting your TCP/IP stack and Winsock settings back to their default values.

D. Restart Your Computer

Upon completing these steps, restart your computer for these changes to take effect fully. After rebooting, launch Darktide once more and check if Error Code 2007 has been resolved.

10. Verifying Game Files Through Steam’s File Integrity Check Tool

Another potential solution to fixing Darktide error code 2007 is to verify the game files through Steam’s built-in file integrity check tool. This process ensures that all the necessary game files are present, up-to-date, and in their proper format. Any missing or corrupted files will be detected and replaced automatically. To do this effectively, follow the steps outlined below:

A. Open Steam

First, make sure you have Steam installed on your computer and that you are logged into your account.

B. Navigate to Library

From the main Steam interface, click on Library at the top of the screen.

C. Find Warhammer 40,000: Darktide

In your Library list, locate Warhammer 40,000: Darktide (or simply search for it in the search bar) and right-click on the game title.

D. Access Properties

From the drop-down menu that appears after right-clicking on Darktide, click on Properties to open a new window with various options related to your game.

E. Verify the Integrity of Game Files

Inside the Properties window, switch to the Local Files tab. Here you will find an option labeled “Verify Integrity of Game Files…“. Click on this button and allow Steam to work its magic. It will begin scanning all game-related files for any issues or discrepancies. If Steam detects any problems with your files during this process, it will automatically download and replace them with their correct versions.

Also Read: How to Fix Valorant Error Code 59?

Conclusion

Successfully tackling Warhammer 40K: Darktide error code 2007 is crucial to reconnecting you to the immersive world of gaming that we all love. Delving into the world of technical troubleshooting can sometimes feel daunting, but with the proper guidance, you’ll be back in your element in no time.

By following these steps and trying out the various solutions listed above, you’re taking proactive measures towards resolving your connectivity issues and ensuring a seamless gaming experience. Perseverance and patience are key when troubleshooting any error code.

It’s possible that fixing Darktide error code 2007 in Warhammer 40K might require trying multiple solutions before finding the one that works best for you. Be persistent and recall that nearly every technical problem has a solution just waiting to be discovered. Soon enough, you’ll regain control over your adventures in Darktide and be ready for countless hours of uninterrupted gameplay!